The Ultimate Cheat Sheet For Car Key Cover Fiat 500
Fiat 500 Key Fob Replacement
If your 500 keyfob stops functioning, try another to see if it is able to be detected by the car. If it does, then the problem is probably related to the battery or water damage to the original fob.
Replace the battery first. The "+" side should be facing down.
Dead Battery
The battery is often the reason behind the fob's inability to function. It's easy to fix and most fobs will warn you when the battery is dying. You can find the instructions for most car key fobs on YouTube or in your owner's guide. You can also bring it to a local locksmith or the dealer that provided it to you to replace it.
Sometimes a fob stops working due to a problem on the circuit board inside. It's not often, but it does happen. If you drop the fob onto something hard, it could cause damage to the internal chip. It could be a problem if you have an aftermarket fob and it doesn't work. In this case, you will be required to go to a locksmith or dealer and have it reconfigured to work with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with locks, unlocks, and trunk buttons – new keyless entry replacement (will require cutting and program by locksmith).
Chips Damaged
Fiat 500 key fobs are wireless devices that transmit signals to the car when you press the button. It has a microchip that contains the information that is needed to communicate with the car. If the chip is damaged, it won't transmit the correct code, and the car will not start. A locksmith can fix this type damage. United Locksmith can complete this repair on both traditional and modern models, so do not hesitate to call.
Locksmiths can program an entirely new key fob. It's cheaper to do this than going to the dealer and works just as well. You'll have to provide certain information to the locksmith, such as the year that your car was built and the model.
fiat key cover with an old dollar bill if you're not certain what to do. The copper in the bill is abrasive and will remove oxidation and dirt. However, it won't harm the microchip. The chip may not be repaired if it is physically damaged. This can happen when you fall it, ram it over with your car or experience any other kind of physical strain.
Water Damage

Water damage is likely to occur on your fob, no matter if you dropped them in the water accidentally or left them in a pocket while swimming or splashed water on them during a rainy afternoon. Even if you only have some water on the key, this can cause serious issues with its electronics and hinder it from functioning properly.
It is possible to fix this issue by taking the fob out and cleaning it using a paper towel. Once the fob has dried, you can then replace its battery and it will begin working again.
You can also take it to an auto repair shop or locksmith to have it professionally cleaned and programmed. These professionals can use special equipment to ensure that the key fob is compatible with your car's computers.
When the key fob on your Fiat 500 stops working, you might feel angry and stressed. It can be costly and cumbersome to take your key fob to the dealer. A locksmith can replace your key fob, without having to visit an auto dealer. This is why they are a far better choice than the dealership.
Pairing Issues
When you drop your key fob or it stops working, and there is nothing the issue there could be a chip that has gone awry. It could be due to water damage or a dead battery. it could just be that you need to reprogramme it.
In most cases, this can be done by following the steps in your owner's guide. However it's a good idea to have a locksmith from your automotive take care of this if you're having issues or the instructions in your manual don't work for you. This will ensure that your chip isn't damaged and is likely to be the cheapest solution.
Some 500 owners have also reported that their key fobs do not lock their vehicles. This could be a problem if you plan to fill up at an gas station. Some owners have reported that the locking system on their 500 has malfunctioned and they've had to replace the entire intermediate steering shaft. This problem has actually been reported in a technical service bulletin (TSB) issued by Fiat.
A reputable locksmith is able to assist you when your Fiat is having problems. They'll be able to duplicate your existing key or create a new one that will unlock and start your vehicle. They can do this without seeing your old key, and it's generally cheaper than purchasing one from the dealer.